Hoover U4730 Owner's Manual page 6

NOTE:Toensureproper operationof the cleaner,verifythat therubber O-ringis inplaceand tightenal!collars.
Toa_tach thelower handle, atign w ith nozzle
openinginthe base of the cleaner {Diagram
11. Push together firmlyand tom the knob
clockwise t o tighten (Diagram la).
To attashthe bag, holdthe handleandfirmly
push into lowerhandle(Diagram 2). Turnthe
top knob counterclockwise to tighten and
snap bag clip onto lower handle (Diagram
2a).
To attach the upper handle, align with
middlesectionof cleanerandpush firmly
into place (Diagram3). Turn the knob
cIockwiseto tighten (Diagram 3a).
To keepthe cordout of the
waywhilevacuuming, snap
it intothe cord clip onthe
baskof theupper handte.
WARNING: FULLY ASSEMBLE B EFORE O FEPATIHG.
CORD STORAGE
HiGH(ON)
Based on the model purchased Tilt the cleaner back before Fortidy cordstorage, w rap
your cleanermay have thevariable you start vacuuming. A t the cord around upper and
speedswitch insteadof an ON/OFF sametime, use yourfoot to _owercordwrapson back
switch, pressthe nozzledown onto of cleaner.
thecarpet.