Et-Up Functions - Hitachi 20SA2B Operating Manual

-SET UP- FUNCTIONS
Select MENU, 1, and ENTER with the remote control to display 3 of the -SET UP- Functions. There are a total of 6 -SET
UP- Functions.
Use the CURSOR UP or DOWN to scroll through the functions, or use the number buttons to highlight a function. The
functions highlighted in purple can be selected by pressing ENTER. To exit the on-screen display, press MENU or
RECALL.
, ,O '_
I1)
-SETUP-
I CL06B) _
2 INITIALSETTING
3 CHLD LOCK
4 - S_r UP -
OFFTILER
ONTIII_
ALA.qM Tk_7_
NOTE: To use the NUMBER buttons to control your Hitachi TV, the MULTI-PAGE SELECT switch must be set
to "TV" mode.
To see an autodemonstration of the on-screen display, press and hold the POWER button on the
TV set for approximately 5 seconds. Press the POWER button on the TV again to end the
autodemonstration.
• CLOSED CAPTION r_
When CLOSED CAPTION is highlighted in purple, press ENTER to see the following display:
- CLOSEDCAPTION -
I DISPLAY :ON
2 MCOE : CAPTION
3 _:I
Closed captions are the dialogue, narration, and/or sound effects of a television program or home video which are
displayed on the TV screen. Your local TV program guide denotes these programs as E]
DISPLAY: ON/OFF is to turn the E]display on or off.
MODE: CAPTION is for the program you are viewing.
MODE: TEXT is for additional information such as news reports or a TV program guide. This information covers the
entire screen and viewing the TV program is not possible. TEXT may not be available with every _ program.
CHANNEL 1 is used for the primary language (usually English).
CHANNEL 2 is sometimes used for a second language
(mayvaryby r_gJon ) ,
Use the CURSOR UP or DOWN to highlight the function to change, press ENTER to change the function, and press
MENU to exit.
NOTE: The wordMUTE willnot be displayed ifthe DISPLAY is ON. Ifyou do not have sound,make sure
MUTE is notset.
14