Hitachi 20SA2B Operating Manual page 5

BEFORE OPERATING YOUR TV SET
ANTENNA CONNECTIONS
These sets are equipped with one VHF/UHF antenna terminal. _he VHF/UHF terminal can Ioe used for normal TV,
cable TV (CATV), a TV game, etc.
1. VHF (75_) antenna!CATV
When using a 75 ohm coaxial cable system, disconnect
the VHF adaptor from the VHF 75 ohm receptacle and
connect the outdoorantenna or CATV cable to a VHF 75
ohm receptacle.
To Outdoor Antenna or C&TV Cable
VHF/UHF
75 Oh_ _ ' (disconnect)
Coaxial Cable ""-VHF Adaptor
2. VHF (300_) antenna/UHF antenna
When using a 300 ohm twin lead from an outdoor
antenna, disconnect the (VHF or UHF) indoor antenna
leads from screws of the (VHF or UHF) adaptor, and
connect outdoor (VHF or UHF) antenna leads to these
screws of a (VHF or UHF) adaptor.
VHFIUHF
"t TO Outdoor VHF
_1_ or UHF Antenna
(connect)
VHF ADAPTOR
3. When both VHF and UHF antennas are
connected
Attach an optional ANT. MIXER to the TV antenna
terminal, and connect the cables to the ANT. MIXER.
(Rear of TV let] TO Outdoor VHF
Antenna
TO UHF _ VHF/UHF _,,
AntennB
Notes
1. If an outdoor antenna/CATV is to be used, discon-
2.
.
nect the indoor antenna. Do not leave both the
indoor and outdoor antennas/CATV connected at
the same time, since ghosting and poor reception
may result.
Consult your dealer or service store for the ANT.
MIXER or VHF adaptor.
The special converter (decoder) will be supplied by
the cable company.
5