Advertisement
BACKGUARD
INSTALLATION
INSTRUCTIONS
Gas Ranges
A. Remove
main top.
B. Place the backguard
on top of end panels at the rear of range.
C. Connect
the "disconnect
plug",
for power
to backguard
if equipped
with
electrical
features.
See No. 1.
D. Insert machine
screws through
lower inside flange
of end caps and end panels.
Secure
with the hex nuts provided.
(See No. 2).
E. Insert machine
screws
through
elongated
holes (See No. 3) at bottom of backguard
and
side flanges
of burner
box. Secure with the hex nuts provided.
E Attach
lower edge of backguard
to vent outlet with two sheet metal screws.
(See No.4)
11
Advertisement
