Dishes Are Not Dry - Haier ESD100 User Manual

Dishwasher does not work:
• Check if the circuit breaker needs to be reset or if the fuse needs to be replaced.
• Check if the unit is in "OFF" mode,
• Check if the door is open, You may need to close the door properly.
• Check that you have pressed "POWER" button after proper selection.
Dishware and glassware/flatware are cloudy
and not properly cleaned:
• Use of old or poor detergent,
You need to make sure that detergent is fresh,
• The water may be hard in your area,
You may need to install a water softener.
• Spray arms may be blocked.
You may need to rearrange dishware and utensils.
• Water pressure may be low,
You may need to adjust the water pressure.
Make sure it is between 20 to 120 (PSI),
• Water temperature may be lower than what is recommended,
(120 Degree F / 49 Degree C) You may need to adjust the water temperature on
your water heater.
• Overloading of dishware,
You may need to rearrange or remove some dishware from the load,
• (May have selected wrong cycle,) Inappropraite cycle selection,
You may need to select the proper cycle,
Dishes are not dry:
• Low water temperature.
You may need to regulate the water temperature to 120 Degree F / 49 Degree C
or select Hi-Temp Wash option.
• Make sure the rinse agent dispenser is filled and the proper amount is used,
• Avoid nesting and do not overload.
• Load items in a tilted position if possible so the water will run off easily,
• Dishware washed in higher temperatures will dry faster.
• Some plastic materials may need to be towel dried,
22