Enter BIOS Setup
The BIOS is the communication bridge between hardware and software.
Correctly setting the BIOS parameters is critical to maintain optimal system
performance.
Use the following procedure to verify/change BIOS settings.
Power on the computer.
1.
Press the
2.
of the screen during the Power On Self Test (POST).
Press F1 to continue, DEL to enter Setup.
Pressing
Utility.
It is strongly recommended that you do not change the default BIOS settings.
Changing some settings could damage your computer.
50
key when the following message briefly displays at the bottom
Del
takes you to the American Megatrends BIOS CMOS Setup
Del