GE JD900 Owner's Manual page 25

Cleaningthe glass cooktop, ge.com
LOC_UNLOC_.OLO aSECONOS Control Lockoutsection.
Cleanyourcooktopafter
eachspill. Use CERAMA
BRYTE ® Ceramic Cooktop
Cleaner.
Normal Daily Use Cleaning
ONLY u. e (,EILBd_IA BRYTE (;ermnic
Co{}ktop Cleaner on the glass cooktop.
Other creams may not be as effective.
To maintain and protect the smthce of
yore _glass c{)oktop, ti}llow these steps:
[] Before using the c{}oktop for the
fi,_t time, clean it with CEI{BdMA
BRYTE ': Ceramic Cooktop Cleaner
This helps protect the top and
makes clemmp easier:
[] Dail) use of (;EILBd_IA BRYTE _:'
Ceramic Cookt{}p Cleaner will help
kee I, the cooktop looking new.
[]
Shake the cleaning cream well.
Apply atmv drops of C.EIL_dMA
BRYTE _2' Ceramic Cooktop Cleaner
directly to the cooktop.
[]
Use a paper
towel or CEI_Bd_4A
BRYTE _ Cleaning Pad fi}r Ceramic
Cooktops to clean the entire
cooktop st/i-J[il c e.
[] Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE:It is veryimportantthat youDONOT
heat the cooktopuntil it has beencleaned
thorough l_L
Usea CERAMA BRYT£ _ Cleaning
Padfor Ceramic Cooktops.
Burned-On Residue
WARNING:DAMAGE to yourglass surface
may occurif youusescrubpadsother thanthe
pad includedwith yourcooktop.
[] Allow the cooktop to cool.
[] Spread a few drops of CEIL_dMA
BRYTE _)Ceramic Cookto I) Cleaner
on the entire bm'ned residue area.
[]
Using a CEILBdMA BRYTE (_)
Cleaning Pad fi}r Ceramic
Cooktops, tub the residue area,
a II.' , lving, i)i'esstli'e
......
as needed
[] If any residue remains, repeat the
steps listed above as needed.
[] For additional protection, alter all
residue has been removed, polish
the entire sm'iace with CEI_L_dMA
BRYTE ': Ceramic (_ooktop Cleaner
and a paper towel.
The CERAMA BRYTE _3 Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts Cente_
See flTstructions under "To Order
Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
[] Allow the {ooktop to cool.
[] Use a single-edge razor blade
scraper at approximately a 45 °
angle against the glass surtace
and scrape the soil. It will be
necessary to apply pressm'e to
the razor scraper in order to
remove the residue.
[]
After scraping with the razor
scraper, spread a few drops of
CEILBdVlA BRYTE : Ceramic
Cooktop Cleaner on the entire
burned residue area. Use a
CEILBdMA BRYTE '_Cleaning Pad to
relnove any relnaining residue.
[]
For
additional protection,
after all residue has been
removed, polish the entire
surface with CEI_Bd_IA BRYTE':
Ceramic Cooktop Cleaner
and a paper towel.
25