Intended Use; Bevel Adjustment - DeWalt DWS520 Instruction Manual

FIG. 1
K
F
E
X
M
L
D
S
U
B
C
FIG. 2
M
INTENDED USE
The DWS520 track saw is designed to cut wood. Do not use this
saw to cut solid-surface countertops (i.e., Corian®).
,_, WARNING: To reduce the risk of serious personal injury, do not
use this saw to cut solid-surface countertops. Material build-up
may inhibit proper function of the plunge return, leaving the blade
exposed.
ADJUSTMENTS AND SET-UP
_ WARNING: To reduce the risk of injury, turn unit off and
disconnect it from power source before installing and removing
accessories, before adjusting or when making repairs. An
accidental start-up can cause injury.
_, WARNING: Before using the track saw, ALWAYS make sure all
functions are working properly!
Bevel Adjustment (Fig. 1)
The bevel angle can be adjusted between 0° and 47 °.
1. Loosen the bevel adjustment knobs (E).