GE EER2000 Owner's Manual page 26

Cleaningthe glass cooktop.
Cleanyourcooktop after
each spill. UseCERAMA
BRYTE ® Ceramic Cooktop
Cleaner.
Normal Daily Use Cleaning
ONLY use CE_ BR'_FE®Ceramic
Cooktop Cleaner on the glass cooktop.
Other creams may not be _tseffective.
To maintain and protect the surface of
your ,glasscooktop, follow these steps:
[]
Before using the cooktop for the
first time, clean it with CERAMA
BRYTE®Cermnic Cooktop CleaneL
This helps protect the top and
makes cleanup easieL
[_ Daily use of CERAMA BRYTE®
Ceramic Cooktop Cleaner will help
keep the cooktop looking new.
%
Shake the cleaning cream well.
Apply a few drops of CERAMA
BRYTE® Ceramic Cooktop Cleaner
directly to the cooktop.
[]
Use a paper towel or CERAMA
BRYTE® Cleaning Pad for Ceramic
Cooktops to clean the entire
cooktop surface.
[_ Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE:It is veryimportantthat youDONOT
heat thecooktopuntil it hasbeencleaned
thoroughly.
i _ _ _ i iiii _ i I i_i i i
Use a CERAMA BRYTE_ Cleaning
Pad for Ceramic Cooktops.
Burned-On Residue
WARNING:DAMAGE to yourglass surface
mayoccurif you usescrubpadsother than
thoserecommended.
[77 Allow the cooktop to cool.
[_ Spread a few drops of CERAMA
BRYTE®Ceramic Cooktop Cleaner
on the entire burned residue area.
%
Using the included CERAMA
BRYTE ® Cleaning Pad for Ceramic
Cooktops, rub the residue area,
applying pressure as needed.
%
If any residue remains, repeat the
steps listed above as needed.
Fox additional protection, after
all residue has been removed,
polish the en6re surface with
CERAMA BRYTE®Ceramic
Cookmp Cleaner and a paper towel.
The CERAMABRYTE_ Ceramic
Cooktop Scraper and all
recommended suppfies are
available through our Parts Center.
See instructions under "To Order
Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
%
Allow the cooktop to cool.
Use a single-edge razor blade
scraper at approximately a 45 °
angle against the glass surface
and scrape the soil. It will be
necessary to apply pressure to
the razor scraper in order to
remove the residue.
%
After scraping with the razor
scrapm; spread a few drops of
CERAMA BRYTE® Ceramic
Cookmp Cleaner on the entire
burned residue area. Use the
CERAMA BRYTE® Cleaning Pad to
remove any remaining residue.
Fox additional protection,
after all residue has been
removed, polish the en6re
surface with CERAMA BRYTE®
Ceramic Cookmp Cleaner
and a paper towel.
26