GE EER2000 Owner's Manual page 22

Usingthe self-cleaning oven.
o
C-s If
_Clean_
o
LJim J
Looj
How to Delay the Start of Cleaning (onsome models)
Make sure the clock shows the correct
time of day:
[] I,atch the doon
[_ Touch the SeffClean pad.
[-_ Using the + or - pads, enter the
desired clean time.
[_ Touch the Start Time pad. The
earliest start time you can set will
appear in tile display:
[_ Using the + or - pads, enter the
time of day you want the clean cycle
to start.
[_ Touch tile Start/On pad.
The display Mll show the start time. It
Mll not be possible m unlatch die oven
door until the temperature drops below
the lock mmperamre.
The oven shuts off automatically when
tlle clean cycle is complete, and 0:00 will
flash in the display:
ToStop a Clean Cycle
Touch tile Clear/Offpad.
Wait until the oven has cooled below die
locking temperature to unlatch the doon
You Mll not be able to open die door
Hgbt away unless die oven has cooled
below the locking mmpemture.
After a Clean Cycle
You may notice some white ash in the
oven. Wipe it up with a damp cloth after
the oven cools.
If whitespotsremain, r emove themwith a soap-
filledsteel woolpadandrinsethoroughly with
a vinegar a ndwatermixture.
These deposits are usually a s_dt
residue tllat cannot be removed by
the clean cycle.
If tile oven is not clean after one clean
cycle, repeat tile cycle.
You cannot set tlle oven for cooking
until the oven is cool enough for the
door to be unlatched.
While the oven is self-cleaning, you
can press file Clock pad to display
file time of day: To return to file
clean countdown, press the Sell
Clean pad.
Apply a small amount of vegetable oil
m a paper towel and Mpe die edges of
the oven shekes with the paper towel.
Do not spI W with Pam ®or other
lubricant spews.
22