Unpacking Your Dryer; Location Of Your Dryer; Dryer Dimensions - GE Profile DPGT650 Owner's Manual And Installation Instructions

Installation Instructions
UNPACKING YOUR DRYER
Tilt the dryer sideways and remove the foam
shipping pads by pulling at the sides and breaking
them away from the dryer legs. Be sure to remove
all of the foam pieces around the legs.
Remove the bag containing the drying rack,
literature and serial cable.
LOCATION OF YOUR DRYER
I MPORTANT:
Gas
dryers
are not
approved for
mobile home installation.
MINIMUM CLEARANCE OTHER THAN
ALCOVE OR CLOSET INSTALLATION
Minimum clearance to combustible surfaces and
for air openings are:
• 0 inch clearance both sides
• 1 inch front
• ] inches rear
Consideration must be given to provide adequate
clearance for proper operation and service.
DRYER DIMENSIONS
Front View
27"
(68.6 cm)
437/8 "
(111.4 cm)
Side View
)
51"
'_ (129.5 cm)
]7z/4 "
(94.6 cm)
29"
I_ (7].7 cm)