GE Profile DPGT650 Owner's Manual And Installation Instructions page 10

Lock
You can lock the controls to prevent ang
selections from being made. Or you can lock
the controls after you have started a cgcle.
Children cannot occidentally start the dryer
bg touching pods with this option selected.
To lock the dryer, press and hold the DRY
LEVELand TEMPbuttons at the same time
for 3 seconds.To unlock the drger, press and
hold the DRYLEVELand TEMPbuttons for
3 seconds.
When the lock function is enabled, CL will
blink in the displag with the estimated time
remaining.
Estimated Time Remaining
Displagsthe approximate time remaining
until the end of the cgcle.
As the cgcle begins, you will see an initial
approximate total cgcle time in the displag.
Then lights will "race" in the display.This
means the dryer is continuously monitoring
the amount of moisture in the load. The lights
will continue until the drger sensesa low level
of moisture in the load. At that point, the
dryer will calculate and display the
approximate time remaining.
MY CYCLES
Mg Cgcles
To save a favorite cgcle, set the desired
settings and hold down the MYCYCLES
button for 3 seconds. A beep will sound
to indicate the cgcle has been saved.
To use gour custom cgcle, press the MY
CYCLES button before drying a load.
To change the saved cgcle, set the desired
settings and hold down the MYCYCLES
button for 3 seconds.
See page 8 for more details.
10