Preparing For Use - Philips HX1510 Manual

C
C
3
1
2
C
Noise level HX1526, HX1511, HX1510:
- Lc = 67dB(A)
Noise level HX2585, HX2538
- Lc = 66 dB(A)

Preparing for use

Mounting the appliance to the wall
1 Mount the charging unit to the wall, using
2 screws (3.0x30mm) and 2 wall plugs (S5)
(not included).
To drill the holes in the right places, you can
use the drilling stencil on the last page of
these instructions for use.
Charging the appliance
1 Charge the appliance for at least 16 hours
before using it for the first time.
Make sure the appliance is switched off when
you start charging it.
You can put the toothbrush in the stand and
let it charge continuously.
However, when you first start using the appliance,
it is recommended that you use it until the
battery is empty.To do so, use the appliance in the
ENGLISH
7