Advertisement
ge.com
Normal Operation,
Timer Displag
During normal operation, the present time of day and AM or PH show in the control display
area. When the demand computer
determines a regeneration is needed, RECHARGE TONIGHT
begins to flash in the display, along with the present time. RECHARGE TONIGHT flashes until
the next regeneration start time, then changes to RECHARGE NOW, which flashes until the
regeneration
is oven The displag also shows the current cgcle in the regeneration process.
When the valve is in transition between cgcles, both indicators flash.
RECHARGETONIGHT
RECHARGE NOW
Feature: Optional
Recharge Controls
Sometimes, a manually started regeneration (recharge) may be desired or needed,
Two examples:
::Ji:: You have used more water than usual (house guests, extra washing, etc,) and gou may run out
of soft water before the next regeneration.
_ You did not refill the storage tank with salt before it was all gone.
Use one of the following features to start a regeneration immediately,
or at the next preset
regeneration
start time.
RECHARGE NOW
Pressand hold the TOUCHor HOLD button until RECHARGE NOW starts to flash in the control
displag area.The water softening sgstem begins an immediate regeneration and, when over in
about two hours, you will have a new supply of soft waten Once started, you cannot cancel this
regeneration.
RECHARGE TONIGHT
Touch (do not hold) the TOUCHor HOLD button. RECHARGE TONIGHTflashes in the control displag
area. A regeneration will occur at the next preset regeneration start time. If you decide to cancel
this regeneration, touch the same button once more.
Feature: Program
Memorg
If electrical power to the water softening system is interrupted, the control display is blank, but the
control keeps correct time for about 72 hours. When power is restored, you have to reset the present
time only if the display is flashing. All other settings are maintained and never require resetting
unless a change is desired.
If the time is flashing after a long power outage, the water softening system continues to work as it
should to provide you with soft waten However, regenerations
mag occur at the wrong time of dag
until you reset the control to the correct time of day.
15
Advertisement
