Trigger Switch - Craftsman 320.26314 Operator's Manual

TO ATTACH BATTERY PACK (Fig. 5)
1. Align the raised portion
on the battery pack with
the grooves on the rear
of the reciprocating saw,
then attach the bat-
tery pack to the tool as
shown.
.
Make sure the latch on the
battery pack snaps into
place and that the battery
pack is secured to the saw
before beginning operation.
TO DETACH BATTERYPACK
Fig, 5
1. Press the latch located on the front of the battery pack to release battery pack.
2. Pull forward on the battery pack to remove it from the saw.
_k WARNING" Battery tools are always in operating condition. Therefore, the
trigger switch should always be locked when not in use or when carrying the tool
at your side.
TRIGGER SWITCH (Fig. 6)
1. To turn the saw ON, push
the lock-off button to left side
then depress trigger switch.
2. To turn it OFF, release the
trigger switch and push the
lock-off button to right side
to lock the trigger switch.
NOTE: The lock-off button
can only be activated when
the trigger is released.
Fig. 6
Trigger Switch Lock-off Button
VARIABLE SPEED (Fig. 6)
The variable speed trigger
switch delivers higher speed with increased trigger pressure and lower speed
with decreased trigger pressure.
2633.4 ManuaLRevlsed_07-0322 Page 18