Packing List; Power Bar - Craftsman 320.26314 Operator's Manual

2. Inspect the tool carefully to make sure that no breakage or damage occurred
during shipping.
3. Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
4. If any parts are damaged or missing, return the product and packaging to the
place of of purchase.
PACKING LIST
Reciprocating saw, one saw blade and Operator's Manual.
POWER BAR
This Lithium-Ion battery pack is equipped with a POWER BAR, which is used to
display the battery pack's remaining run time. Press the POWER BAR button to
display the LED lights. The LED lights will stay lit for approximately 4 seconds.
NOTE: The POWER BAR can be used whether the battery is attached or re-
Fig. 2
POWER BAR
_ J
® ® @@ 8o-loo%
Charge
O@ @@ 60"79%
Charge
© © • ® 4o.s9%
Charge
0 0 O @ o.39
Charge
, Is
C) O C)_(_,- Under 10%
Charge
discharged
moved from tool.
Low capacity warning
• If one LED on the POWER BAR begins to flash, the battery pack's charge is
under 10% capacity and should be recharged.
• Unlike other battery-pack types, Uthium-lon battery packs deliver fade-free
power for their entire run time, The tool will not experience a slow, gradual
loss of power as you work. To signal that the battery pack is at the end of its
run time and needs to be charged, power to the tool will drop quickly. The
POWER BAR will begin to display four flashing LED lights when the battery
is completely discharged. When this happens, remove the tool from the work
piece, and charge the battery pack as needed.
NOTE: The POWER BAR may also display four flashing LED lights due to an
overload or high temperature situation (see SmartOhip
TM
Battery protection).
26354 ManuaLRevlsed_07-O322 Page 14