Gas Cylinder - Coleman 3000 SERIES Assembly Instructions Manual

BEFORE YOU
BEGIN ASSEMBLING
YOUR NEW QUALITY COLEMAN
GAS BARBECUE GRILL:
=_ FOR EASE OF ASSEMBLY, leave the grill on
the inside bottom foam packing tray unUI the
wheels have been attached. (See representative
example at right). Remove the outside foam from
the right and left sides of the frame base at this
time.
c_ Remove all cartons locatedon top of the barbecue
grill base and set aside
START THE COOKING GRIDS
SEASONING PROCESS BEFORE
ASSEMBLING YOUR GRILL !
CAST iRON
GRIDS
:_ Cast Iron grids are on select modelsonly.
<, Your cast iron grids may have some rusting.
This is normal.To removethe rust, scour the
rusty areaswith steelwool,i.e. SOS pad, until
all traces of rust are gone. Wash, dry and
seasongrids.
SEASONING CAST iRON
GRIDS
SEASONING ISTHEPROCESS OFALLOWING O ILTOBE
ABSORBED INTO THEIRON, C REATING A NON-S'I]CK,
RUSTPROOF FINISH. H ERE'S HOW TODOIT:
Preheat Oven to 350°F.
Wash with hot, soapy water and a stiff brush.
Rinse and
dry completely.
Oil the
grids (allsurfaces,top and bottom)
with
MELTED solid
vegetableshortening.
Turn
upside
down on the
top
rack of a 350°F
pre.heatad oven.
Put aluminum foil on the bottom rack to catch
any excessdrippings.
Bake the gridsfor one hourat 350°F.
Let the grid cool slowly in the oven.
,:::) Store, uncovered, in a dry place when cooled.
Engineering Codes
LE113313/LEI 13333
CARTON A
- MISCELLANEOUS PARTS
TwoWheels ................................... (16)
TwoMainControlKnobs.......................... (32)
One Grease Wire ............................... (49)
One Grease Tray ............................... (49a)
TwoGreaseDrippans ........................... (48)
One Perforated Tent ............................. (52)
One MeatProbe ................................ (57)
One MeatProbeReceptacle ....................... (57a)
One Handle Assembly
One Literature Bag
One6-lobeScrewdriver
Hardware bag(s)
Assortedassembly hardware - One IgniterKitbag
TwoAxlepins ................................ (3)
SideBurnerModelsincludethefollowing:
OneSideBurnerControlKnob ................... (40)
11412077AX (Pg.2)
Tools Needed
,=;>#20 6 -LobeScrewdriver(included)
#2 Phillips Screwdriver
An adjustable wrench
9-VoltBattery (Included)
Optional T ools
_7116 =and5/16"BoxEndWrenches
_7116 =Nut Driver
_Electric or Cordless Screwdriver
_#20 6-Lobedriverbit
_#2 Phillips driverbit
ONE CARTON-
L.P. GAS
CYLINDER
CARTON B - 2
SIDE TABLE
ASSEMBLIES
(FOR MODELS WITHOUT SIDE BURNER)
ONERIGHT SIDE TABLE ASSEMBLY
ONELEFTSIDE TABLE ,ASSEMBLY
CARTON B -
1
SIDE TABLE ASSEMBLY
(FOR MODELS WITH SIDE BURNER)
ONE SIDE BURNER GRID......................... (41)
ONE RIGHTSIDETABLEASSEMBLY
ONE LEFT SIDE BURNER ASSEMBLY
One bag Assorted assembly hardware
ONE CARTON-COLEMAN SIDE BURNER
ASSEMBLY
(FOR MODELS WITH SIDE BURNER)
ONE CARTON- FRONT DOORS
/_WARNING:
Combustion by-products produced when using
this
product
contain chemicals known to the
State of California to cause cancer, birth
defects,
or other
reproductive
harm.