Brother GeoBook NB-60 Getting Started Manual page 125

Backspace and Clear buttons
The C/CE and the _1 buttons are used to delete or clear your entry. They are
located to the right of the Readout bar.
ii ii
BUTTON FUNCTION
C/CE
€
KEYBOARD
KEY
CTRL+ C
BACKSPACE
Click once to reset the current number to
zero; click again to reset any operations in
progress and clear the operations from
memory.
Click to delete the rightmost number from
the Readout bar. If you click after perform-
ing a calculation, the entire product will be
deleted from the Readout bar.
Memory buttons
Use the following buttons with the Calculator's memory function (see
Understanding Memory on page 120).
The M+ and the M- bu_ons cannot be used while the NUM indicator is on
(see Using the_keybo_ar-d"_as a keypad on page 119).
BUTTON
STO
RCL
M+
KEYBOARD
KEY
l]
'M
M- CTRL+ M
FUNCTION
Store in memory.
]Recall from memory.
!Add the number displayed in the Readout
bar to the number stored in active
:memory.
Subtract the number displayed in the Read-
out bar from the number stored in
tmemory.
Calculator 117