Table of Contents
Advertisement
3.2.10 Remote Access Configuration Sub-Menu
You can use this screen to view the Remote Access Configuration Menu. This
feature allows access to the Server remotely via serial port. Use the up and down
arrow ( / ) keys to select an item. Use the Plus and Minus (+/-) keys to change
the value of the selected option. The settings are described on the following pages.
Feature
Configure Remote Access type and parameters
Remote Access
NOTE: The items listed below will appear when Remote Access is set to [Enabled].
Serial Port Number
Base Address, IRQ
Serial Port Mode
Option
Disabled
Enabled
COM1
COM2
Read only
115200 8,n,1
57600 8,n,1
38400 8, n, 1
19200 8,n,1
9600 8,n,1
66
http://www.tyan.com
Description
Enables remote access to system
through serial port.
Select Serial Port for console
redirection. Make sure the
selected port is enabled.
Select Serial Port settings.
Advertisement
Table of Contents
