GE JVB37 Owner's Manual & Installation Instructions page 6

Installation
Instructions
Downdraft Vent
System
mfyou have questions, call 800.GE.CARES or visit our Website at: www.GEAppliances.com
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
• IMPORTANT - Save t hese
instructions for local inspector's use.
• IMPORTANT - Observe all
governing codes and ordinances.
• Note to Installer - Be sure to leave these
instructions with the Consumer.
• Note to Consumer - Keep these
instructions for future reference.
• Note - This appliance must be properly
grounded.
• Proper installation is the responsibility of
the installer.
• Product failure due to improper installation
is not covered under the Warranty.
TOOLS YOU WILL NEED
Flat-blade screwdriver
Pliers
Jig saw
Carpenter square Ill
Duct tape
Ductwork to suit
the installation
REMOVE PACKAGING
Open the carton and remove parts package.
Check contents to be sure all pieces are
present. (The parts package may be attached
to the power cord.)
Remove the shipping materials. Remove the
carton and set aside. The carton can be used
as a pad when changing or adjusting vent
direction.
PARTS INCLUDED
Stabilizing brackets
(all models) (4)
Remote raise/lower assembly (for 36" models only)
Wire box (2)
and screws (4)
Switch cover
plate (1)
Plastic strain
relief (2)
Attachment
bracket (1)
Wire and white
connector (1)