Operation; Before You Clean - Bissell PROdry 7350 series User Manual

Operation
Before you clean
1. If desired,movefurniture to anotherarea if
cleaningan entire room.
2,
3.
Vacuum area with a dry vacuumcleaner
beforecleaning
Planyour cleaning routeto leavean exit
path. It is best to begincleaningthe corner
farthest from your exit
Fill the clean/solution tank
1,
2,
3.
4,
5,
6.
Remove the clean/solution f rom the baseof the
machineby pullingup andout from the back.
Youcanalso detentthe handleandpull the
tank straightup if youdesire.
Unscrew the blackcapandredinsert,Remove.
Fillthetankupto the FILL LINE with hot
tap water.
Add 3 ounces of formula (Alwaysuse
genuineBISSELL formulas to maximize
cleaningandfor the safetyof your machine).
OR If using a BISSELL 3X Concentrate
add 1 ounce of formula.
Replacethe cap and insert andtighten by
turning clockwise.
Replacethe clean/solutiontank back into the
machine.Be sure that the cap is seated in
the receiver.
Carpetcleaning
1. Makesure the ReadyTools Dialis in the
FLOOR CLEANING position.
2. Plugthe PROdry into the properoutlet and
turn the powerON( I ) usingthe switch inthe
back.
3,
With yourfoot, pressthe gray handle release
leverlocated on the back of
the unit. Takecareto noticethe waythe
machinefloats forward.
4,
Whilepressingthe spraytrigger make 1
forward wet pass and another 1 back.
Repeatonce and moveon to the next
sectionof carpet or area rug to be cleaned.
Takecare not to run over loose objectsof
the edgesof area rugs.
www.bissell,com 800.237.7691
ug120-4035 7350 708En.indd 7 8/21/08 4:22:35 PM