Maintenance And Care; Machine Storage - Bissell PROdry 7350 series User Manual

Maintenanceand care
Cleaning/replacingthe TLR Power Roller
1. Turnpower switch to OFF(O) and unplug
the machine.
2, Removebothtanks, detentthe handle and
turn the machineon its back.
3. Removethe 6 screws from the sole plate
using a Phillipshead screwdriver,set 6
screws and sole plateaside.
4. Turnthe machineon its side so the cord side
is againstthe floor.
5. Removethe 2 screws from the belt guard
and set aside
Note: These2 screws are the sameas the 6
sole platescrews).
Removethe top of the belt guard.
6. Unhookthe belt from the TLR PowerRoller
and slidethe roller down through the hole
in the belt guard bottom.Slidethe roller up 6.
off the metal dowel (which is attachedto the
swing arm).
7. Cleanthe TLR PowerRollerby rinsing with
hot water and mild soap.Allow to dry before
replacingif desired.
8. Toreplace,slidethe TLRPowerRolleron to
the metal dowel with the taller cog at the
top. Pushthe taller cog of the roller back up 8a.
through the hole in the belt guard bottom
and re-attach the belt. Placethe belt guard
top into positionoverthe bottom half and
tighten togetherwith 2 screws.
9. Turnthe machineon to its back and
attach the secondswing arm. Be sure the
arm is properlyin place both on the TLR
PowerRollerand in the base. Pushthe TLR
PowerRollerdown so it is nestedunderthe
nozzle. 8c.
10. Re-attachthe sole plate using the 6 screws.
Machine storage
Put the unit away in a closetor basement f or
the next use. Store cleanerin a protected,dry
area.Since this product useswater, it must not
be storedwhere there is a danger of freezing.
Freezingwill damage internal components and
voidthe warranty.
www.bissell.com _
800.237.7691
ug120-4035 7350 708Enindd 11 8/21/08 4:22:50 PM