Bissell PROdry 7350 series User Manual page 9

Ready ToolsTM(continued)
2. Check forcolorfasb_ess in an inconspicuous
place,
3. If possible,check upholsterystuffing.
Coloredstuffing may bleedthrough fabric
when wet.
4. Planactivities to give upholsterytime to dry.
5. Vacuum thoroughly t o pickup loose debrisand
pethair. U sea vacuum wi1_a brushattachment
anda crevice tooltodeaninfabricfoldsandtufts.
6. Tobegincleaning with attachments,follow
the instructionson page 7 for filling the
clean/solutiontank.
7. Setthe ReadyTools dialto the TOOLS setlJng.
Thiswill allowfor suclJon f rom the hose.
8. Attachthe desiredcleaning tool to the endof
the hose.
9,
Cleanby pressingthe trigger to spray
solutiononto the area to be cleaned.Slowly
movethe tool back andforth overthe soiled
surface.Releasethe trigger to suctiondirty
water.Continueto clean in the area,working
in small sections,until dirt is removed.
Caution:Do Not Overwet.
10.
11.
12.
Whenfinishedcleaning, removeand rinse
tool(s)in clean,runningwater.
It is recommendedthat you suctionclean
water from the tap to rinseout the hose.
Beforewrappinghoseonto tool rack, lift end
of hoseandstretch out to ensureall water is
clearedfrom hose.
13.
14.
15.
Wrapflex hosearoundtool rack.
Emptycollectiontank and rinseout,
following instructionson page 10.
If the ReadyTools d ial becomesdifficult to
turn, the diverterassemblythat holdsthe dial
may needto be cleaned. T oclean,flush hot
waterthrough the nozzle.Makesurethe dial
is set to FLOOR CLEANING.
www.bissell,com 800,237.7691
ug120-4035 7350 708En.indd 9 8/21/08 4:22:39 PM