Philips Lightolier Kubik 1.5 SL111A1 Specifications

Page 1 of 4
Dimensions
Ballast Channel
Ordering guide
(complete luminaire consist of unit & power feed)
Unit/Louver Cat. No. Lamp (linear)
SL111A128PIU
SL111A128PIH
SL111A154PIU
SL111A154PIH
SL111A154MZ1 1-54W T5 HO
SL111A154MZ2
SL111A154PCU
Features
Flush Unit: 2-1/2" (64mm) overall height, meets ADA requirements.
Ballast Channel: 0.05' (1.3mm) min. thick, 1-1/2' x 1-1/2' (38mm x 38mm) brushed
and anodized extruded aluminum ballast channel. Provided with knock-outs and
threaded holes to accept all mounting accessories.
Channel Cover: 0.04' (1mm) thick brushed and anodized aluminum ballast cover.
Press-fit installation. No visible hardware.
Multi-Function Block (2): Solid brushed and anodized aluminum finish. Retains
lampholder housing to the ballast channel. Also functions as a wireway for
continuous rows and patterns.
Lampholder Housing (2): 0.08' (2mm) min. thick, 1' (25mm) square brushed and
anodized aluminum with turret style locking socket.
Plug Insert (2): 0.56" (14mm) dia. 0.31" (8mm) min. deep Solid brushed and anodized
aluminum finish. Hide the holes at each end of ballast channel when luminaire is not
row mounted.

Options and Accessories

Emergency Lighting: Electronic Bodine slim profile battery pack The emergency
ballast senses the power failure and immediately switches to emergency mode
by illuminating the lamp at a reduced lumen output for a minimum of 90 mins.
The battery fully recharges within 24 hours. Add suffix (EM) to the catalogue
numbers.
DALI Interface: Digital Addressable Lighting Interface available upon request
for individual luminaires. Ballast 120 volts or 277 volts only. Consult your
Lightolier representative.
Markings
cULus Listed. Suitable for damp locations.
Mounting
Direct Mount: Square canopies or invisible feed suitable for plaster ceiling, exposed
ceiling or suspended ceilings mounts.
Lightolier
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2008 Philips Group • SL111A1.pdf
Lightolier is a Philips group brand
46-3/16"
(1173mm)
Channel Cover
Volts
120/277V
1 -28W T 5
347V
120/277V
347V
120V
277V
120/277V
www.lightolier.com
Lampholder Housing
Multi-Function Block
Ballast Type
Programmed Rapid Start
Dimming Mark 10
Dimming PowerSpec HDF
Suspended Mount: Single stem or aircraft cable with round canopy suitable
for mounting on a standard outlet box for plaster ceiling, exposed installation
or suspended ceilings mounts. Stem and cable mounts can both be used on
the same luminaire.
Patterns: Suitable for different patterns in continuous row mounting.
Wall Mount: Can be wall mounted vertically or horizontally.
Electrical
Ballast: Electronic slim profile 1 lamp 28W T5 or 54W T5H0 linear ballast.
U: Universal voltage ballast automatically detects 120V to 277V, 50 or 60Hz
operations.
1: 120V ballast only.
2: 277V ballast only.
H: 347V ballast only.
Lampholder: G5 plug-in base, miniature Bi-pin.
Finish
Natural brushed and anodized aluminum. All painted parts are powder coat
paint process.
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
Canlyte
3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460
SL111A1
KUBIK 1.5
Bare Lamp Flush Unit
1-1/2"
(38mm)
2.5"
(64mm)
1"
(25mm)
Plug Insert
Finish
Brushed and Anodized Aluminum
Type:
www.canlyte.com