Advertisement
Page 2 of 4
Accessories/Options
Cat. No.
Finish
SL003JLG
Textured Light Grey
SL003JWH
White
Cat. No.
Finish
SL003K
Corrosion Protected
Cat. No.
Finish
SL003LLG
Textured Light Grey
SL003LWH
White
Cat. No.
Finish
SLO03M18LG
18" Textured Light Grey
SLO03M36LG
36" Textured Light Grey
SLO03M48LG
48" Textured Light Grey
SLO03M72LG
72" Textured Light Grey
SLO03M18WH
18" White
SLO03M36WH
36" White
SL003M48WH
48" White
SLO03M72WH
72" White
Cat. No.
Finish
SLO04M18LG
18" Textured Light Grey
SLO04M36LG
36" Textured Light Grey
SLO04M48LG
48" Textured Light Grey
SLO04M72LG
72" Textured Light Grey
SLO04M18WH
18" White
SLO04M36WH
36" White
SLO04M48WH
48" White
SLO04M72WH
72" White
Lightolier
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2008 Philips Group • SL111A1.pdf
Lightolier is a Philips group brand
Feed Canopy Kit
Mounts to end or middle of the channel for power feed from
3" (76mm) or 4" (102mm) octagonal outlet box. Kit includes
one 0.05" (1.3mm) thick, 4-1/2" (114mm) grounded square steel
plate. Comes with 4 wires 18 AWG, 10 Amps max.
Invisible Feed Kit
Accepts conduit or cable with 3/8" (10mm) or 1/2" (13mm)
electrical connector (by others). Kit includes one 0.06" (1.5mm)
thick wall by 1/2" (13mm) dia. seamless steel stem and,
one 0.09" (2.3mm) thick by 5/8" (16mm) by 15/16" (24mm) dia.
aluminum connector. (20 Amps max.)
Grid Ceiling Feed Kit
Mounts along runner or at the intersection of runners. Kit
Includes one 2-1/8" (54mm) deep by 4" (102mm) grounded
octagonal outlet box, one 0.05" (1.3mm) thick universal
crossbar, one 4-1/2" (114mm) white plastic square, and two
t-bar clips 5/32" (4mm) thick spacer, one 0.04" (1 mm) thick
aluminum canopy and two t-bar wrap around clips. Comes
with 4 wires 18 AWG, 10 Amps max.
Power Feed Stem Kit
Mounts to a 3" (76mm) or 4" (102mm) octagonal outlet box
Kit includes one 0.024" (0 6mm) thick, 5" (127mm) round steel
canopy, and one 0.06" (1.5mm) thick, 1/2" (13mm) dia. seamless
steel stem, available in 4 different lengths and two decorative
cylinder head screws. Complete installation of Power Feed
Stem Kit. Field cuttable, re-thread stem 1/4-18 NPS. Comes
with 5 pre-assembled wires. 10 Amps max.
Stem Mounting Kit (non-electrical)
Mounts to a 3" (76mm) or 4" (102mm) octagonal outlet box
Kit includes one 0.024" (0 6mm) thick, 5" (127mm) round steel
canopy, and one 0.06" (1.5mm) thick, 1/2" (13mm) dia. seamless
steel stem, available in 4 different lengths and two decorative
cylinder head screws. Complete installation of Power Feed
Stem Kit. Field cuttable, re-thread stem 1/4-18 NPS.
Job Information
Canlyte
www.lightolier.com
3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460
SL111A1
KUBIK 1.5
Bare Lamp Flush Unit
Type:
www.canlyte.com
4-1/2"
(114 mm)
Square
Advertisement
