Advertisement
Page 3 of 4
Cat. No.
Finish
SL003NLG
Textured Light Grey
SL003NWH
White
Cat. No.
Finish
SL004NLG
Textured Light Grey
SL004NWH
White
Cat. No.
Finish
SL003P4
Brushed Aluminum
Cat. No.
Finish
SL003Q
Zinc plated
Cat. No.
Finish
SL003R
Brushed Aluminum
Lightolier
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2008 Philips Group • SL111A1.pdf
Lightolier is a Philips group brand
Power Feed Cable Kit
Mounts to a 3" (76mm) or 4" (102mm) octogonal outlet box.
Kit includes one 0.024" (0.6mm) thick, 5" (127mm) round steel
canopy, one 0.05" (1.3mm) thick grounded crossbar threaded
stud, one 0.046" (1.2mm), 96" (2438mm) long aircraft galvanized
cable with zinc plated hanger adjusting glider hardware,
two white plastic cable stay and one 18 AWG (AWM), 10 feet
(3048mm) long white cord, 10 Amps max.
Cable Mounting Kit (non-electrical)
Mounts to a 3" (76mm) or 4" (10mm) octagonal outlet box.
Kit includes one 0.024" (0.6mm) thick, 5" (127mm) round steel
canopy, one 0.05" (1 3mm) thick grounded crossbar, threaded
stud, one 0.046" (1.2mm), 96' (2438mm) long galvanized
aircraft galvanized cable with zinc plated hanger and
adjusting glider hardware. Can be used with either Cable
or Stem Power Feed Kit.
Extension Blank (4')
Permits power feed between two 1.5" x 1.5" (38mm x 38mm)
brushed and anodized units in a straight run with supplied
extra wires 18 AWG, 10 Amps max, and wire connectors
to energize them. Includes one 46-3/16" (1173mm) long
extruded aluminum channel and cover, two solid aluminum
multi-function blocks as a wireway, plug inserts and wire
connectors.
Invisible Coupler
Invisible coupler for joining two Kubik 1.5 units together
mechanically or/and electrically. Recommended for direct
surface mounting. Comes with 4 wires 18 AWG, 10 Amps max.
5 Face Connector
Kubik 1.5 units coupled with exclusive solid brushed and
anodized aluminum 5-face connectors and power feed can
satisfy virtually any layout requirement. The connector permits
you to create square, rectangular, continuous rows, L, T,
X configurations. Includes four threaded couples, plug insert
(3), four wires 18 AWG and wire connectors, 10 Amps max.
Job Information
Canlyte
www.lightolier.com
3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460
SL111A1
KUBIK 1.5
Bare Lamp Flush Unit
46-3/16"
(1173 mm)
Type:
www.canlyte.com
Kubik 1.5
1.5"
(38 mm)
Advertisement
