Setting The Clock; Setting The Rf Out Channel - Philips VR530/07 Manual

Setting the clock

If the display shows an incorrect time or ' --:-- ',
the time and date must be reset manually.
If a TV channel that transmits TXT/PDC (tele-
text/PDC) is stored under programme number
'P01', time/date will automatically be taken from
the TXT/PDC information. (SMART CLOCK)
1.Switch on the TV. If required, select the pro-
1.
gramme number for the video recorder.
2.Press . The main menu will appear.
2.
MENU
3.Select 'INITIAL SET UP' with
3.
confirm with
B 1
4.Select 'CLOCK' with
4.
with .
B 1
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
END=EXIT
5.
5. Check the time in 'TIME'. If required, please
change the time with
6.
6. Check 'DAY', 'MONTH' and 'YEAR' in the
same way.
7.
7. Choose 'SMART CLOCK' ON or OFF with
.
B 1
8.
8.
To end, press
STATUS/EXIT
Time/date is displayed incorrectly despite
manual setting
* With Smart Clock, time/date is transferred
from the TV channel saved on 'P01' and auto-
matically corrected.
Switch off Smart Clock. In 'SMART CLOCK',
select 'OFF' with
B 1
You can switch on 'SMART CLOCK' again when
you select 'ON'.
K B L C
.
and confirm
K B L C
.
0..9
.
.

Setting the RF out channel

In some reception locations it is possible that a
TV channel will be sent on the same or similar
frequency as the video recorder.
Result: As soon as the video recorder is
switched on, the reception quality for this or sev-
eral other TV channels will decrease.
The following steps will show you how to change
the pre-set 'transmission' (RF out channel) fre-
quency on the video recorder.
What is RF out channel?
and This electronic component in the video recorder
allows the device to transmit audio and video
signals via the aerial cable. These signals can
be received on a TV set just like TV channels.
What is RF out channel frequency?
This frequency or channel indicates the channel
on which the audio or video signal is transmit-
ted.
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press
MENU
3.
3.
Select 'INITIAL SET UP' with
confirm with
4.
4.
Select 'RF OUT' with
with
B 1
SELECT K L CHOOSE B
END=EXIT
5.
5.
Press
B 1
6.
6.
Press
K B
which is not broadcasted between channel 22
and channled 69 in your area.
7.
7.
Press
B 1
signals directly from the VHF/UHF TV aerial,
select the channel 22 first . Then, press
and confirm with
8.
8.
To end, press
7
. The main menu will appear.
K B
.
B 1
K B L C
.
RF OUT CH 35
.
or 0..9 to select the channel
L C
. When you want to receive TV
.
B 1
.
STATUS/EXIT
and
L C
and confirm
L C
EN