Saeco SYNTIA HD8837 Manual page 20

• Turn the selector switch clockwise to
the " " position to start dispensing
the descaling solution.
Red
• The machine carries out a quick di-
spensing cycle of the descaling solution
through the steam wand.
Red
• When the machine stops the dispensing
through the steam wand, turn the
selector switch back to the " " position.
Red
• The descaling solution is dispensed
inside the machine and collected into
the drip tray.
Red
• Once this second dispensing is comple-
te, turn the selector switch clockwise
to the " "position to continue the
descaling cycle through the steam wand.
Red
• The dispensing of the descaling solu-
tion at regular intervals is managed
automatically by the machine (the bar
shows the cycle progress).
Red
• When the solution in the tank is fi ni-
shed, the icon on the side is displayed to
indicate that the selector switch must
be brought back to the " " position.
Red
• The icon indicates that the tank must
be rinsed and fi lled.
Rinse the water tank thoroughly
and fi ll it again with fresh drinking
Red
water up to the MAX level.
• Empty the container used to collect the
liquid dispensed by the machine and
place it back under the steam wand.
• When inserting the tank filled with
water in the machine, the icon on the
side is displayed; turn the selector
switch clockwise to the "
Red
• The machine starts the rinse cycle.
In this phase the whole water tank
content is dispensed through the steam
wand.
Red
• When the water in the tank is fi nished,
the icon on the side is displayed to
indicate that the selector switch must
be brought back to the " " position.
Red
" position.
• 19 •