Hitachi DZMV230A Instruction Manual page 100

Message
Cannot delete scenes.
Scene without control
info. Update control
information.
Disc is full. Cannot add
control info.
Disc is not formatted.
Format the disc now?
Disc error has oc-
curred. Format the
disc now?
Disc error has oc-
curred. Formatting is
not complete.
Disc error has oc-
curred. Keep disc in-
side & restart.
Disc full. Cannot ex-
ecute.
Drive overheat. Please
retry later.
Stop processing
English
100
Cause & Troubleshooting
This may occur when scene that was edited for divi-
sion, etc. is to be deleted.
Combine the divided scenes, and then delete them.
The thumbnail at the start of program or play list may
not appear when disc edited on device other than
this DVD video camera/recorder is used, or, when ed-
iting, such as combining, is performed on this DVD video
camera/recorder. Choose "YES" on screen for verifi-
cation.
If thumbnail information is insufficient, Disc Navigation
will automatically create thumbnails after it starts.
The number of entered scenes has reached the limit
that can be entered, so the control information for gen-
erating thumbnails cannot be added.
Combine several scenes or delete them.
Has the disc been initialized on a PC?
Choose "YES" and initialize the disc when using it on
this DVD video camera/recorder.
Has the disc been initialized on PC? Has initializing the
disc on PC been interrupted?
Choose "YES" and initialize the disc when using it on
this DVD video camera/recorder.
The disc may be dirty.
Remove the disc and wipe off fingerprints, dust, etc.
before reusing it, or use another disc.
Disc error could have occurred during editing of scenes.
Turn off the DVD video camera/recorder with the disc
being used in it, connect AC adapter, and then power
the DVD video camera/recorder again. Repair of
scenes will be tried.
Delete unnecessary scenes before using this disc, or
use another disc.
The temperature inside the DVD video camera/re-
corder is too high, and reading or writing of the data
on disc may not be performed normally.
Turn the DVD video camera/recorder off and wait for
a while. The temperature will be effectively decreased
if the DVD video camera/recorder is placed in a well-
ventilated spot.
The button was pressed to stop processing of multi-
ple scenes.
Reference
page
83
—
77, 78
87
87
23
40
80
40
74