Lenovo ThinkPad X230 Tablet User Manual page 132

Table 6. Security menu items (continued)
Menu item
Fingerprint
116
User Guide
Submenu item
Password at restart
Set Minimum Length
Power-On Password
Hard Disk x Password
Predesktop Authentication
Reader Priority
Security Mode
Selection
• Enabled
• Disabled
• Disabled
• Password length options
• x characters (4≤x≤12)
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• External ➙ Internal
• Internal Only
• Normal
• High
Comments
such as a Wake on LAN
attempt. If you select
Disabled, no password
prompt is displayed; the
computer goes ahead and
loads the operating system.
To prevent unauthorized
access, set the user
authentication on the
operating system.
If you select and enable
Password at restart,
a password prompt is
displayed when you restart
the computer. If you select
Disabled, no password
prompt is displayed; the
computer goes ahead and
loads the operating system.
To prevent unauthorized
access, set the user
authentication on the
operating system.
Specify a minimum length
for power-on passwords
and hard disk passwords.
If you set the supervisor
password and specify
a minimum length for
passwords, no one but you
can change the length.
See "Power-on password"
on page 54.
Refer to "Hard disk
passwords" on page
54.
Note: Hard Disk 1 means
the hard disk drive built into
your computer.
Enable or disable fingerprint
authentication before the
operating system is loaded.
If External ➙ Internal
is selected, an external
fingerprint reader is used
if attached. Otherwise, an
internal fingerprint reader
is used. If Internal Only
is selected, an internal
fingerprint reader is used.
If fingerprint authentication
fails, you still can start
the computer by entering