Lenovo ThinkPad X230 Tablet User Manual page 129

Table 5. Config menu items (continued)
Menu item
Beep and Alarm
Serial ATA (SATA)
Submenu item
Power On with AC Attach
Intel (R) Rapid Start
Technology
Password Beep
Keyboard Beep
SATA Controller Mode
Option
Selection
• Disabled
• Enabled
• Disabled
• Enabled
Enter after:
• Immediately
• 1 minute
• 2 minute
• 5 minutes
• 10 minutes
• 15 minutes
• 30 minutes
• 1 hour
• 2 hours
• 3 hours
• Disabled
• Enabled
• Disabled
• Enabled
• Compatibility
• AHCI
Chapter 8
Comments
Enable or disable a feature
that powers on the system
when the ac power adapter
is attached.
If you select Enabled, the
system is powered on when
the ac power adapter is
attached. When the system
is in hibernate state, the
system resumes.
If you select Disabled, the
system is not powered on
nor resumed when the ac
power adapter is attached.
To use this feature, a special
partition on the solid-state
drive is required.
When enabled, you can
enable the 30 Day Standby
function through the Power
Manager program. The
function enables the
computer to enter a lower
power state after the
specified time in sleep
state. And it takes only
seconds to resume normal
operation.
Enable this option to have
a beep sound when the
system is waiting for a
power-on, hard disk, or
supervisor password.
Different beeps will sound
when the entered password
matches or does not match
the configured password.
Enables or disables the
keyboard beep when
unmanageable key
combinations are pressed.
Selects SATA controller
operation mode.
.
Advanced configuration
113