Using An Expresscard, A Flash Media Card, Or A Smart Card - Lenovo ThinkPad X230 Tablet User Manual

(english) user guide
Hide thumbs Also See for ThinkPad X230 Tablet:
Table of Contents

Advertisement

Adjusting the video output quality of your camera
To adjust the quality of the video output of your camera, do the following:
1. Open the Communications Utility window.
2. Click Advanced camera settings. The Properties window opens.
3. Configure the settings and select an image quality value. The following values are available:
• Speed Priority: It gives you a faster frame rate for the best real-time video conferencing during the
day. However, at night or in a dark environment, the image does not have the best quality.
• Balance: This gives you a balance between speed and image quality. The image obtained at night or
in a dark environment is better than with Speed Priority.
• Image quality priority: This gives you a high-quality video and the best image at any time of the
day. The image is very clear even at night or in a dark environment, but at the expense of frame
rate. The video streaming might slow down.

Using an ExpressCard, a flash media card, or a smart card

Depending on the model, your computer might have the following card slots:
• An ExpressCard slot that supports:
– 54 mm-wide ExpressCard
– Smart card
• A 4-in-1 media card reader slot that supports:
– Secure Digital (SD) card
– Secure Digital High-Capacity (SDHC) card
– Secure Digital eXtended-Capacity (SDXC) card
– MultiMediaCard (MMC)
Note: Your computer does not support the CPRM feature for SD card.
Installing an ExpressCard, a flash media card, or a smart card
Attention: Before you start installing a card, touch a metal table or a grounded metal object. This action
reduces any static electricity from your body. The static electricity could damage the card.
To install a card, do the following:
1. Locate the appropriate type of slot for your card. See "Locating computer controls, connectors, and
indicators" on page 1.
2. Make sure that the card is correctly oriented:
• For ExpressCard: The notched edge of the card is facing upward and pointing toward to the card slot.
• For flash media card: The metal contacts are facing downward and pointing toward the card slot.
• For smart card: The metal contacts are facing upward and pointing toward the card slot.
3. Press the card firmly into the card slot.
If the plug-and-play feature is not enabled for the installed ExpressCard, flash media card, or smart card,
do the following to enable the feature:
1. Open Control Panel.
2. Click Hardware and Sound.
46
User Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkpad x230i tablet

Table of Contents