Selecting The Input Signal - Focusrite Green Range Manual

p r e a m p l i f i e r
Preamplifier
CHANNEL STRIP
Controls
The Mic and Input Trim rotary controls set the gain on the input signal (see the
section Setting the Gain).
+48 is the phantom power button. When lit, it provides phantom power to the
microphone connected to the Mic socket.
ø is the phase button, and reverses the phase of the unit when lit (see the section
Setting the Phase).
The Output Fader controls the output level from the unit, and is used to balance the
output level to match the input level of the next piece of equipment.
The Inst light indicates that the Inst switch on the back panel is switched on.

Selecting the Input Signal

You can select which of the three input sockets on the back panel is used as the input
signal to the unit:
Input
Inst
Line
Mic
10
-20 -10 -7
Mic
+48
dB
Used when...
Mic rotary control clicked to Line position, instrument
connected to the Inst input on the back panel.
Mic rotary control clicked to Line position.
Mic rotary control not clicked to Line position.
-3 -1 0
+1 +2 +3
-5
Input Trim
– +
Ø
dB
Inst
Output Fader
–
+
dB