Table of Contents
Advertisement
7.8 USB setting
Connect the GPS navigator to PC via the MINI USB port to transmit data, or back up data from
the navigator data to PC.
The GPS navigator provides MASS STORAGE and MS STORAGE modes. Select one in the
USB setting.
7.8.1 MASS STORAGE
1. Have the GPS navigator in operation status and the SD card plugged in the slot;
2. Tap
in the setting interface to enter USB Option as follows.
Select MASS STORAGE and tap
3. Connect the MINI USB terminal of the USB cord to the MINI USB port of the GPS navigator
and the standard USB terminal to the USB Host port of PC. Then, the computer will recognize the
navigator and prompt the following interface.
Frequency
Drag the slide block rightward (or tap
increase the frequency and leftward (or tap
reduce the frequency. The frequency range is 88.00
Mhz-108.00 Mhz.
to save it.
37
Chapter VII Setting
) to
) to
Advertisement
Table of Contents
