Basic Use - Kogan EXINAV G6 User Manual

Chapter I Beginning Use
1.2.1 Power Supply
The Kogan G6 GPS can be powered by the built-in battery or external power supply.
When the GPS navigator is unconnected to the charger, it is powered by the Li-polymer battery.
The battery capacity icon in the system main interface shows current residual battery
capacity.
When the GPS navigator is connected to the charger, it is powered by external power and the
battery is charged.
[Attention] The GPS navigator adopts internal non-removable Li-polymer battery. To avoid
battery rupture, explosion, release of hazardous substance or burn, do not unpack, pierce, strike on
or discard the battery in fire or water.
1.2.2 Charging by C Charger
Plug the USB terminal of the C charger into the USB port of the GPS navigator and the other to
the power socket to supply power and charge the GPS navigator.
[Note] The charging indicator light is red during charging. Do not unplug the charge until the
battery is fully charged and the indicator light turns green. Please charge the GPS navigator when
the battery is low or used up.
1.2.3 Charging by Car Charger
Plug one terminal of the car charger into the USB port of the GPS navigator and the other to the
charging port to supply power and charge the GPS navigator.
[Note] To avoid damage due to current surge, plug in the car charger after the automobile is
started.

1.3 Basic Use

1.3.1 Powering on/off & Sleep
1.3.1.1 Powering on
3