Table of Contents
Advertisement
Chapter VII Setting
To disconnect the navigator from PC and enter charging mode, you may tab
.
5. After communication, unplug the MINI USB cable.
7.8.2 MS ACTIVESYNC
1. Tap
in the setting interface to enter USB Option as follows.
Select MASS ACTIVESYNC and tap
to save the setting.
2. Install the application Mobile Device in a drive of PC. Then the following icon will appear in
the drive selection.
3. Connect the MINI USB terminal of the USB cable to the MINI USB port of the GPS navigator
and the standard USB terminal to the USB Host port of PC.
4. After the PC finds new hardware, double click the Mobile Device drive in the selection area to
enter the memory of GPS navigator for data transmission.
5. After transmission, unplug the USB cable.
[Attention] For data safety, please back up your system data in external storage. Our company has
38
Advertisement
Table of Contents
