Table of Contents
Advertisement
Inserting a BD or DVD
Close the lid.
The ACCESS/PC indicator flashes. During this process, do not remove the
power source, shake, or subject the camcorder to impacts.
When a new BD-RE, BD-R, DVD-RW, or +RW is inserted, see p.43.
Attach the charged battery pack to the
camcorder or connect the camcorder to
the mains.
Turn the power switch to "OFF".
Then, press down the DISC EJECT switch
until the ACCESS/PC indicator lights, then
release.
After several seconds, the lid pops open.
Open it fully with your hand.
Place the recording surface of the BD/DVD
face down, then push down on the centre
of the BD/DVD until it clicks into place.
• For single-sided discs, the side
opposite the label is the recording
surface.
• To record on the other side for
double-sided discs, remove the disc
(p.42), flip it over, and reload it.
41
Advertisement
Table of Contents
