How To Use The Lcd/Evf Setup And Initial Setup - Hitachi DZ-BD70E Instruction Manual

How to use the LCD/EVF setup and initial setup

Menu items
LCD/EVF Adjust*
EVF Display
Beep
Power Save
Record LED
Language
Demo Mode
Reset
* The viewfinder is always On while "LCD/EVF Adjust" is being set regardless of the
setting of "EVF Display".
Setting the Date and Time
See "Setting the date and time" (p.25) for setting procedures.
Note
The camcorder is equipped with a built-in rechargeable battery to retain the
date and time in memory. If the built-in battery is depleted, the date and time
will need to be reset. Periodically (once every six months) recharge the
internal battery by connecting the camcorder to the mains or attaching a
charged battery pack to the camcorder while leaving the camcorder turned off
for 24 hours.
68
Explanation of functions
LCD Adjusts the brightness of the
Brightness LCD monitor.
Adjusts the brightness of the
EVF Brightness
viewfinder.
Adjusts the colour density of
Colour Level the LCD monitor and
viewfinder.
If set to "On", images always appear in the
viewfinder regardless of the orientation of the
LCD monitor.
Select "Off" to turn off the beeps that sound
when any button is pressed.
When set to "On", the camcorder power will
automatically turn off if it is left idle for
approx. five minutes during recording pause
mode.
When set to "Off", the camcorder does not
turn off automatically except while in sleep
mode.
p.83
You can select the display language.
p.69
Returns all menu settings to default.
Initial
Value
–
–
–
Auto
On
Off
On
English
Auto
–