Technische Daten - Genelec 6010A Quick Setup Manual

TECHNIsCHE DATEN

Lower cut-off frequency, –3 dB:
Upper cut-off frequency, –3 dB:
Free field frequency response (± 2.5 dB):
Max. short term sine wave acoustic output
on axis in half space, averaged from
100 Hz to 3 kHz
@ 1 m
@ 0.5 m
Maximum long term RMS acoustic output
in same conditions with IEC weighted
noise (limited by driver unit protection
circuit) @ 1 m:
Maximum peak acoustic output per pair
on top of console, @ 1 m distance with
music material:
Self generated noise level in free field @
1 m on axis (A-weighted):
Harmonic distortion at 85 dB SPL @
1 m on axis
Freq: 70...400 Hz
>400 Hz
Drivers:
Bass
Treble
Weight:
Dimensions:
Height including Iso-Pod™ table stand
Height without Iso-Pod™ table stand
Width
Depth
12 Deutsch
FrEQUENZWEICHE UND FILTEr
< 73 Hz Input connector: Input: RCA female 10 kOhm:
> 21 kHz
Input level for 90 dB SPL output at 1 m:
74 Hz–18 kHz
Level control range relative to max output:
> 93 dB SPL Desktop control operating range:
> 99 dB SPL
> 91 dB SPL Crossover frequency, Bass/Treble:
Bass Tilt control operating range in –2 dB
steps:
The 'CAL' position is with all tone controls set to 'off' and the
> 102 dB
input sensitivity control to maximum (fully clockwise)
.
< 5 dB
Bass amplifier power with an 8 Ohm load:
< 3 %
< 0.5 %
Treble amplifier power with an 8 Ohm load:
Long term output power is limited by driver
unit protection circuitry
76 mm (3") cone
Amplifier system distortion at nominal output
19 mm ( / ")
3 THD+N:
4
metal dome
Mains voltage:
1.4 kg (3.1 lb)
195 mm (7 / ")
11 Voltage operating range:
16
181 mm (7 / ")
1
8
Power consumption
121 mm (4 3 / ")
4
114 mm (4 / ")
1
2
.
vErsTÄrKEr
Idle
Full output
pin +,
sleeve -
-6 dBu at
volume
control max
-12 dB
0 to –4 dB
@ 200 Hz
3.0 kHz
0 to –6 dB
@ 100 Hz
12 W
12 W
< 0.08 %
100, 120,
220 or
230 V
±10 %
5 VA
35 VA