Chrysler Sebring Owner's Manual page 75

2009
Hide thumbs Also See for Sebring:
Table of Contents

Advertisement

CAUTION!
When your child restraint is not in use, secure it in
the vehicle with the seat belt or remove it from the
vehicle. Don't leave it loose in the vehicle. In a
sudden stop or collision, it could strike the occupants
or seatbacks and cause serious personal injury.
NOTE:
For
additional
www.seatcheck.org or call 1–866–SEATCHECK.
Lower Anchors and Tether for CHildren (LATCH)
Your vehicle is equipped with the child restraint anchor-
age system called LATCH, which stands for L ower A
nchors and T ether for CH ildren. The LATCH system
provides for the installation of the child restraint without
using the vehicle seat belt. All rear seating positions have
information,
refer
to
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73
lower anchorages that are capable of accommodating
LATCH-compatible child seats having flexible, webbing-
mounted lower attachments. Child seats with fixed lower
attachments must be installed in the outboard positions
only. Regardless of the specific type of lower attachment,
NEVER install LATCH-compatible child seats such that
two seats share a common lower anchorage. If you are
installing LATCH-compatible child restraints in adjacent
rear seating positions, you can use the LATCH anchors or
the vehicle's seat belt for the outboard position, but you
must use the vehicle's seat belt at the center position. If
your child restraints are not LATCH-compatible, you can
only install the child restraints using the vehicle's seat
belts. For typical installation instructions, refer to "In-
stalling the LATCH-Compatible Child Restraint System".
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sebring 2009

Table of Contents