Slide Assembly - PlaySafe 22-PS245 Owner's Manual And Assembly Instruction

2
Required Parts:
Slide x1
Proper Placement:

Slide Assembly

Pre-Assembled Parts:
•
The screws and bolts for the slide rail/ladder legs are inserted on the slide. They will need to be removed prior to
inserting the legs into the slide.
•
The ladder steps should have screws and nuts installed. These will need to be removed prior to inserting the legs and
then reassembled with the head of the screw facing out.
Step Illustration
1
9
Check the lock nut and bolt on the swing seat to
make sure that they are secure.
SLIDE ASSEMBLY
Rail/Ladder Leg x2
Correct Location
Instructions
Remove the screws, washers, and lock nuts from
the holes in the slide.
Front Leg x1
Part Ref. #: PSSH11, PSHW13
Ladder Step x2
Incorrect Location
Hardware Reference
Part Ref. #: PSHW24
2006 Pacific Cycle, Inc.
©
Link Bar x2