Advertisement
3
4
5
Pre-Assembled Parts
•
Swing seats should be attached to the chain.
Step
Illustration
1
8
NOTE: The curved portion of the pole is
the top and it should face the inside of the
swing frame.
Connect the two horizontal poles (must
first be disassembled from the seats) to the
two vertical poles using the hardware
provided. Be sure that the plastic bushings
are between the vertical poles and
horizontal poles.
Reattach the seats onto the horizontal poles
using the flat headed screw, washer, and
lock nut.
Once fully assembled, check that the glider
swings freely. If it does not, make sure
that the bolts holding the vertical poles to
the top bar attachment are not overly
tightened.
SWING AND TRAPEZE ASSEMBLY
Instructions
Hang the swings and trapeze in place from the
swing hooks.
Part Ref. #: PSHW15, PSHW11
Part Ref. #: PSHW1
Part Ref. #: PSHW21, PSHW36
Hardware Reference
2006 Pacific Cycle, Inc.
©
Advertisement
