Connecting To The Component Jacks - Sharp BD-HP20X Operation Manual

Video Connections

Connecting to the Component Jacks

You will enjoy accurate colour reproduction and high quality images through the component jacks.
STEPS
1: Be sure to turn off this Player and the equipment before making any connections.
2: Firmly connect a component video cable (commercially available) to the component jacks (1 and 2).
Caution:
• HDMI output and Component Video
output can not be used at the same
time.
(Red)
(Blue)
(Green)
To COMPONENT
1
VIDEO OUT jacks
Component video cable
(commercially available)
Projector
Video equipment with component jacks
After connecting
• Connect audio equipment or the audio terminals of the TV. (Pages 18-20)
16
To component
2
video input jacks
(Red)
(Blue)
(Green)
AV receiver
TV
This Player
Caution:
• Press HDMI button for 5 seconds, and the
change of "Component Video Out" and "HDMI
Out" is possible.
• Even when there is no cable connected to the
HDMI video out, switching the output to HO-out
(HDMI video out) is still possible.
When HO-out is selected, there will be no signal
from the Component video out.
Blu-ray Disc
Player
COMPO-
NOTE
NENT IN
• Connect the Blu-ray disc player to LCD TV
P
R
directly. If you playback the image via VCR, the
C
( R)
image may deteriorate due to the copy guard
function.
P
B
• When you record the programme where
C
( B)
copyright is protected, the copy guard function is
activated automatically; the programme can not
Y
be recorded correctly. Also, the playback image
via VCR may deteriorate due to this function.
However, this is not a malfunction. When you
watch the programme where copyright is
protected, we recommend that the Blu-ray disc
player be connected to LCD TV directly.
VCR
Connect directly
LCD TV