Partial Repeat Playback (Repeat Playback Of A Specifi Ed Part); Switching Audio; Switching Subtitles - Sharp BD-HP20X Operation Manual

Playback Functions
30
Partial Repeat Playback
(Repeat Playback of a
Specifi ed Part)
1
Press REPEAT during playback.
2
Press c/d to select "SCENE
SELECTION", then press ENTER.
PLAY BACK TITLE PLAY BACK CHAP
3
"SET START POINT" displays.
Press ENTER at the scene where you
want.
• "SET END POINT" displays.
4
Press ENTER at the scene where
you want to set the end point.
• You can press V FWD to fast
forward to the scene where you want
to set the end point. When you reach
the desired scene, simply press I
PLAY and then ENTER to set the end
point. To cancel Repeat Playback,
press REPEAT-OFF.
NOTE
• Press LSKIP, the Repeat Playback is
cancelled and the next chapter being played back.
• Press KSKIP once, the Repeat Playback
is cancelled and the player returns to the start of
current chapter (track).
• If you press KSKIP again (within about 5
seconds) the player will skip to the beginning of the
previous chapter (track).
• For Partial Repeat Playback, set the start and end
points within the same title.
• Repeat Playback may be forbidden depending on
the disc.
• Partial Repeat Playback may not work in multi-
angle scenes.
• If you press DISPLAY, you can confi rm the Repeat
Playback status.

Switching Audio

You can change the audio output channel using
AUDIO.
Each time AUDIO is pressed, the audio
channels (2 channels or multi audio)
change as follows:
BD VIDEO
The newly selected audio track will be
displayed.
BD-RE
When a recorded broadcast with a
Secondary Audio Program is played back:
Switches between "L", "R" and "L+R".
When a recorded broadcast with stereo or
monaural audio is played back:
SCENE SELECTION
SET START POINT "Stereo" is displayed. (Audio cannot be
switched.)
NOTE
• When you play a programme recorded in stereo
or monaural, and if you are listening to the
BITSTREAM sound via the digital output jack, you
cannot select the audio channel. Set "AUDIO OUT"
to "PCM" (page 36), or if you want to change the
audio channel, listen via the analogue output jacks.

Switching Subtitles

If subtitles are provided in multiple languages,
you can switch between them.
Press SUBTITLE during playback.
• The display indicates the subtitle number currently
being played back, and the subtitles appear.
Each time SUBTITLE is pressed, the subtitles
change.
• "– –" is displayed if a disc has no subtitles.
• You can also select "OFF".
DVD VIDEO
DVD-RW DVD-R
BD-R
VR MODE