Video Connections
Connecting to the Component Jacks
•
You can enjoy accurate colour reproduction and high quality images through the component jacks.
STEPS
1:
Be sure to turn off this Player and the equipment before making any connections.
2:
Firmly connect a component video cable (commercially available) to the component jacks (1
and 2).
CAUTION
•
HDMI output and Component Video
output can not be used at the same time.
1
To COMPONENT
VIDEO OUT jacks
Component video cable
(commercially available)
Projector
Video equipment with component jacks
After connecting
•
Connect audio equipment or the audio terminals of the TV. (Pages 18-19)
16
(Red)
(Blue)
(Green)
To component
2
video input jacks
(Red)
(Blue)
(Green)
TV
This Player
Video signal outputs:
•
You need to switch the output to Component
video by pressing HDMI button to enjoy images
via the Component video output. (See page 15.)
COMPO-
NENT IN
P
R
C
(
R)
P
B
Blu-ray Disc
C
(
B)
Y
•
Connect the Blu-ray disc player to LCD TV
directly. If you playback the image via VCR, the
image may deteriorate due to the copy guard
function.
•
When you record the programme where
copyright is protected, the copy guard function is
activated automatically; the programme can not
be recorded correctly. Also, the playback image
via VCR may deteriorate due to this function.
AV receiver
However, this is not a malfunction. When you
watch the programme where copyright is
protected, we recommend that the Blu-ray disc
player be connected to LCD TV directly.
1080i 50/60Hz
576i 50Hz
720p 50/60Hz
480p 60Hz
576p 50Hz
480i 60Hz
For example;
480p: 480 progressive scan
480i: 480 interlace scan
CAUTION
VCR
Connect directly
Player
NOTE
LCD TV