Digital Audio Output Selection Formats; Settings - Sharp BD-HP90RU Operation Manual

SETTINGS

2
The current version of this unit software and the
version of the update file on the USB memory device
are displayed. To update this player software with
update file, select "Yes", and press ENTER.
Software update file is detected in the USB memory device.
Start update?
Current Ver. :
Update Ver. :
3
If the USB memory device is not properly installed or
the correct update file cannot be found on the USB
memory device, an error message is displayed.
Check the file on the USB memory device, and then
reinsert the USB memory device correctly.
Software update file is not detected in the USB memory device.
Confirm that you have transferred the file
to the USB memory device and retry software update.
Confirm that you have inserted the USB memory device
into the correct device.
There is more than one software file
in the USB memory device.
Confirm that only the software update file is
in the USB memory device.

Digital Audio Output Selection Formats

Setup Definition
Decodes Primary, Secondary
PCM and Effect audio streams
together into PCM audio.
Decodes Primary, Secondary
and Effect audio streams
Bitstream
together into PCM audio, then
(Mix)
re-encodes the PCM audio
into DTS bitstream.
Outputs only the Primary
audio soundtrack (main
soundtrack of the movie) so
Bitstream that your audio equipment
can decode the audio
bitstream. You will not hear
Secondary and Effect audio.
Blu-ray discs may include three audio streams.
• Primary Audio: The audio soundtrack of the main feature
• Secondary Audio: Additional soundtrack such as director
or actor's commentary.
• Interactive Audio: Interactive sounds will be heard when
selected.
Interactive Audio is different on each Blu-ray Disc.
48
xxxxxxxxxx
yyyyyyyyyy
Yes
No
OK
OK
Output
terminal
HDMI OUT
OPTICAL PCM 2ch
HDMI OUT/
DTS/PCM
OPTICAL
HDMI OUT
OPTICAL PCM 2ch
10
Press ENTER to start updating.
• The screen becomes dark for a while until the update
screen can be displayed. Please wait for the update
screen to appear. Do not unplug the AC cord.
The picture will temporarily go dark until
the software update display appears.
Wait several minutes and do not unplug the AC cord.
Now updating
Do not unplug AC cord.
*
Update Version
11
When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
• If the update has failed, check the file in the USB
device and try Software Update again.
12
Remove the USB memory device.
13
Press B to turn off the player.
• Delete unneeded software update data using a PC
after the software update process is completed.
Dolby
Dolby
PCM Digital
Digital
Plus
PCM PCM PCM
PCM 2ch PCM 2ch
DTS/
Dolby DTS
Digital
Dolby
Dolby
PCM Digital
Digital
Plus
Dolby Dolby
Digital Digital
NOTE
• Digital audio cannot be copied from the OPTICAL DIGITAL
AUDIO OUT terminal.
• When "Audio Out" is set to "Bitstream (Mix)", Dolby Digital
audio and PCM audio streams for Blu-ray discs will be
output as a DTS audio stream.
OK
yyyyyyyyyy
Audio Stream
Dolby DTS-HD
DTS
TrueHD
PCM PCM
PCM 2ch PCM PCM 2ch
DTS DTS
Dolby DTS-HD
DTS
TrueHD
Dolby
DTS-ES
DTS
Digital
30%
DTS-HD
HR MA
PCM PCM
7.1ch 7.1ch
PCM 2ch
DTS DTS
5.1ch 5.1ch
DTS-HD
HR MA
DTS-ES
5.1ch 5.1ch