Audio Connection; Connecting To The Digital Audio Terminal - Sharp BD-HP90RU Operation Manual

Hide thumbs Also See for BD-HP90RU:
Table of Contents

Advertisement

Audio Connection

Connecting to the Digital Audio Terminal

You can connect audio equipment or the TV to the OPTICAL DIGITAL AUDIO OUT terminal.
For details on digital audio output formats (PCM/bitstream), refer to the digital audio output format selection
table on page 48.
STEPS
1
Be sure to turn off this Player and the equipment before making any connections.
Firmly connect an optical digital cable (commercially available) to the optical digital audio terminals (1 and 2).
2
When using OPTICAL DIGITAL AUDIO OUT,
5.1 ch Digital Output is available.
7.1 ch Digital Output is not available.
NOTE:
7.1 ch Audio is available via the HDMI terminal.
NOTE
Digital audio cannot be copied from the
OPTICAL DIGITAL AUDIO OUT terminal.
After connecting
If necessary, perform the Audio Video Settings. (Page 40)
Prepare the desired disc or content and start playback. (Pages 27–33)
20
TV
Audio equipment with a digital audio input terminal
This Player
Optical digital cable
(commercially available)
Amplifier
1
To OPTICAL DIGITAL
AUDIO OUT terminal
2
To OPTICAL DIGITAL
AUDIO IN terminal

Advertisement

Table of Contents
loading

Table of Contents