The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This warranty does not cover described in this user’s guide.
Upright Vacuum TO ORDER REPLACEMENT BAGS, FILTERS OR BELTS for Model EP825 Call: 1-866-98SHARK (1-866-987-4275) Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time visit our website: www.sharkvac.com FOR TECHNICAL SUPPORT for Model EP825 Call: 1-800-798-7398 Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time Please Note: Both the Pre-Motor and Post Motor Filters are washable.
To select a pile height setting: 1. Turn vacuum cleaner "Off". 2. Select a pile height setting by tilting the vacuum cleaner back until the front wheels are lifted slightly off the floor. 3. Turn the height adjustment knob to the desired setting.
This unit is equipped • Always turn vacuum "Off" before • Do NOT place hands or feet Push the On/Off button once. • Do NOT allow the vacuum cleaner power source. problem. (i.e. clogged hose or filter) • NEVER place the vacuum cleaner unclog the hose and replace the filters.
B) Remove the front panel of the the amount of use your vacuum vacuum cleaner. sees. C) The post filter is facing the front B) Turn unit “Off” and unplug from of the unit on the bottom and wall outlet.