Craftsman 247.88173 Operator's Manual page 9

5. Placechuteontochute baseand securechutecontrol headto
chutesupport bracketwith clevispin and cotterpin removed
earlier.See Figure4.
6. Finishsecuringchutecontrolhead to chutesupport bracketwith
wingnut and hexscrewremovedearlier.See Figure5.
7. Insertthe chutedirectionalcontrol intothe supportbracketon the
rear of thedash panel.See Figure6.
8. Removethehairpinclip from the rear of thechute controlhead.
9. Insertchutedirectionalcontrolinto rearof the chutecontrol head.
Securethe chutedirectionalcontrolto the chutecontrolhead with
the hairpinclip removedearlier.See Figure7.
f
Figure4
f
Figure6
f
\
Figure7
Figure5