Advertisement
TROUBLE
Motor runs
erratically
Excessive
vibration
Unit fails to
propel Itself
Unit falls to
discharge
snow
Motor Stops
CAUSE
Damagedmotor
Obstruction in auger
_osepa_
Damaged auger
Drive belt loose or damaged
Worm auger assembly
Auger drive belt loose or damaged
Discharge chute clogged
Foreign object lodged in auger
snothrower is overworked
CORRECTION
Have the unit serviced by a com-
petent repairman.
Remove obstruction.
Clean auger housing.
Clean ice and snow from discharge
;hute.
Stop motor immediately and unplug
)ower cord.
Tighten all bolts and make all necas-
sa W repairs. If vibration continues,
have the unit serviced by a competent
repairman.
Repair or replace auger assembly.
Replace drive belt.
Replace auger assembly,
Replace if damaged.
Stop motor immediately and unplug
power cord.
Clean dischargechuteand insideof
auger housing.
Stop motor immediately and unplug
power cord.
Remove object from auger.
The motor is equipped with a pro
tector that will disconnect power to
the motor temporarily if the
snothrower is overworked, and will
automatically
reset as the motor
cools. If the motor stops, release
the control bar, disconnect the ex
tension cord and allow the motor to
cool 5 minutes before continuing
operation. If this happens often
take your snow thrower to an autho
fized Craftsman Service Center for
repair and adjustment.
11
Advertisement
